Description
Magnetic Knife Setter for Planers & Jointers.
Jointer & Planer Knife Height Setting Jig, Planer Knife Setter Gage
Set planer knives quickly and accurately with these magnetized setting jigs. The jig holds knives tightly in position while both hands are free to adjust the gibs and cutter head.
Universal knife setter.
Features:
- Keeps knives in perfect alignment while setting.
- Fits planer knives from 12" to 26".
- Leaves hands free to adjust gibs and cutter head
Keep knives in perfect alignment with micro adjustable to 0.001-Inch
Keep fingers safely from razor-sharp cutter blades
Allow for hands-free adjusting of gib and cutterhead
Save you time, hassle and effort
Come as a pair, in a wooden box
Best Planer/Jointer Knife Setting Jigs gauge hold both Planer and Jointer knives quickly, accurately and securely with innovative, industry grade, magnetized setting jigs. This setting jig's revolutionary design holds the knife in firm alignment for hands-free adjusting and tightening, allowing for a higher level of safety, efficiency and workmanship. The jigs keep knives in perfect alignment with micro adjustable to 0.001-Inch. Come as a pair, in a wooden box.
- Highly accurate planer blade vernier setting jigs
- Magnetic feet to attach to the cutter block and hold the blade
- Blades held securely to allow easy locking into place
- Swivel feet accommodate block diameters from 75-125mm
- Micrometer adjustable accuracy with lockable settings
MAGNETIC SETTING DEVICE FOR PLANER BLADES
For Charnwood Planer Knife Setting Jig Set
Magnetic Planer Knife Setting Gauge - The best knives won't perform well unless they are
properly set and aligned. The built-in permanent magnets grip both the planer block and
the knives while you use the integral adjustments to get the knives into perfect position
- adjustable in 0.1mm increments.
1. Magnetic ceramic stop
2. Joints with magnetic connectors
3. Precision depth stop with 0.1mm increments
The set is supplied in a wooden box with 2
setters Three options for setting of knives: Positioning onto the toolholder body with
marking onto the original knife; Positioning onto the toolholder body setting with one of
the supplied gauges; Positioning directly onto the machine table and the tool holder body.
This planer thicknesser knife setting jig set offers a simplified and fast method to set the height of the cutting knives after sharpening or change them. The jigs can be used with most planers, thicknessers or combination machines with open access to the cutterblock.
Please note - this jig cannot be used with machines with fixed aluminium tables as these are not magnetic.
Features:
When refitting planer knives, it is most important that they are re-set and fitted correctly.
Each blade must protrude from the cutterblock by the same amount to give a clean cut, otherwise they will cause an imbalance and a vibration which could damage the machine and will also result in an uneven cut.
These jigs are fitted with strong magnets which will clamp it to the cutterblock.
The feet swivel to account for different diameter cutterblocks.
The knife itself is held onto another magnet which is height adjustable.
The height can be set extremely finely with graduations down to 0.15mm.
With the knife loose in the block ensure both setting jigs read the same, then lock the blades into the block and repeat for the other knives.
Once the jigs are set and locked to the exact setting for your machine, the setting will be saved for future fitting of new or re-ground knives.
Summary Features / Specifications:
Minimum Cutterblock Diameter: 75mm
Maximum Cutterblock Diameter: 125mm
Number Of Knives: 2-4
Height Adjustment: 22mm (Approx 7/8" ;)
Increments Of Adjustment: 0.15mm (0.0059")
Excellent Setting device suitable for all makes and models of Surface Planers, Jointers, Thicknessers and Combination Planer/Thicknessers
These magnetic blades setting jigs delivered in a practical wooden box.
The knife projection can be exactly set due to the adjustable stops 0.1mm adjustments.
The device has been designed with permanent magnets which adheres to the cutter block or the planer table and not the knife, so that both hands are free for setting and tightening the knives.
The setting devices don't need to be held down
High Setting Acuracy ensuring perfect blade alignment and Surface Finish.
Time Saving Device when mounting and setting planer blades
Payment & Shipping
CA PROP 65 WARNING
Let customers speak for us
Very very satisfied with this purchase! Talk about a game changer! Noise difference is unbelievable! Not to mention how well it cuts! Installation was pretty simple and straight forward. Fit perfectly and works even better!
It worked great! It cut straight and clean on a piece of 1 1/4" heavy DOM. Went nice a smooth with no heating of the part. For the money, this is a good deal.
If you need an everyday construction site set of blades, look no further than these. I cut approximately 30 brace blocks from 2x4s for a deck. One blade did 60 cuts like the first cut. I even did a one vertical cut on a 2x8 at the end. All were done on pressure treated lumber, I’m impressed. Can’t beat the price and I will be ordering more. 6/12 tpi for those who want to know.
These work like any other blade that I have purchased. I have not necessarily found any great difference between the most expensive brands and the lower priced brands since I tend to challenge the blade with all types of materials. I would lump this in the mix and buy these based upon the price. At a dollar and a half, for each blade, these are on the very affordable side of what is available. I have sometimes used long metal blades for demolition if I have a large amount of metal embedded (could be conduit, etc.).
I don't often review but I have gone through many planer blade sets for this planer. I'm very glad there is an exact fit replacement as it seems Dewalt has stopped selling blade replacements. These seem to be an exact fit. All dimensions are exact except they are consistently .02 grams heavier and there's no pyramid stamp. I only did the weight because I could not find discrepancies (LxWxHxT). I read a review that they are not as good as the original, don't last as long. May be slightly softer material, IDK...TBD. I will get back to you on this.For now I am giving it 5 stars. I'm on my 9th double pack of blades from Dewalt. That's 4 blade sets per double pack. 36 blade changes. Excellent planer. Glad FoxBC picked up this replacement part.Price = matchesFit = matchesLife & cut = TBDHope this helps, Cheers!
FOXBC 9 Inch 6/12 TPI Demolition Reciprocating Saw Blades for Nail-Embedded Wood, Bi-Metal, 25-Pack with Case --- Received 25 blades as advertised. Haven’t had occasion to use one yet but they are thinner metal, but solid and sharp. Demolition blades are usually bulkier than these. Fit easily into my Dewalt battery operated reciprocating. saw. Plastic case is adequate for keeping them together but doesn’t look like it would take much abuse.
Partial review only, as I need to put these through their paces. The blades are well formed and have no obvious flaws. No curves, errors, etc. The case could use a bit more strength, though, as both pieces of mine are cracked.
I have an old craftsman jointer that desperately needed blades. I bought these and am super happy. Swapped the old ones out and the jointer is back to life. Blades were dharp and flat which is all that's necessary. I'll buy this brand again when I need another set!
Will get dull a little faster then their heated counterparts. However for the first time in 5 sets of blade I’ve just rotated these and did not see a single chip in the blades. This usually happens with any other blades I’ve tried including original DW735 13” blades.
Im going to use these from now on only, needs to be rotated just a little more often, but at the price point they are great. If you start questioning their performance then rotate/replace and go again with a fresh cut. 5 stars!
Customer image
These last almost as long as the expensive ones, they stay strait just as well, and cut very well. Even though the blade will dull slightly faster (i didn't really notice this until i measured the cuts and compared, it's not much), the amount of cut per dollar is higher than the expensive blades, and the amount of efficient cutting per dollar is higher too, since you are working with a fresher blade more of the time.To put it in perspective, the guys that were doing the demo work did not reach 6 inches further to get the expensive blades, they just grabbed these (they were both sitting on the supplies table). These guys hate changing blades and such, because they see it as wasted time, so for these to choose these much more economical blades tells me that I'll be buying these more often.One note, they come with an expandable blade case, but the plastic is "so-so", you probably won't be keeping the case and putting more blades in it like you would some similar cases that you buy separately, but at this price, the case is, essentially, a freebie with the blades, so it's much appreciated.
Quality. Good weight
there are more expensive, higher quality blades available, but this is still a great crosscutting blade and very much worth the money.
I got this for planning old rough Purple Heart after I destroyed the factory knifes ..I’ve excluded before and after photos with no sanding straight out of the planner
Nice container. Worth restoring with a bit of duct tape.I like to test these kinds of saw blades in a hand-powered handle and in a basic battery-powered saw. This gives me a pretty good idea of how well they perform without too easily overheating, which is murder on cutting edges.I'm not sure it shows very well in these pictures, but the kerf produced by hand cutting is wider than that produced with a power saw. I would have liked to see a bit wider kerf, which would have allowed the coating of these blades to last a bit longer than it does.The steel I cut was a medium hard framing steel, as was the deck screw, which is much harder than typical wood fasteners.I'd choose a bimetal blade with 8-tpi for wood demolition unless a lot of deck screws are involved. These blades are best suited for metal, as described.I was able to make a low angle plunge cut in wood and soft metal. For harder metals intended it be cut with this blade, a plunge cut can be started with a Dremel tool pretty easily.Recommended on price and general utility.
Works great
What customers think about the store
The store offers high-quality and affordable replacement blades, knives, and accessories for woodworking tools. Customers praise the sharp cutting edges, precise fit, smooth operation, and long-lasting durability of the products. Many find them comparable or e...