Description
FOXBC 8-1/4 Inch Table Saw Blade 40 Tooth, Replacement for Freud Diablo D0840, DeWalt DWA181440 Finishing Circular Saw Blade, DeWalt DWE7485 Table Saw with 5/8" Arbor, Diamond Knockout
- 8-1/4 Inch Table Saw Blade 40-Tooth ATB, KERF 0.079", 5/8" Arbor, Diamond Knockout
- Ultra thin kerf for fast, durable, and clean cuts.
- Made from high-density tungsten carbide for toughness, wear-resistance, and long life
- Compatible with DeWalt DWE7485 DCS7485B DCS7485T1 and SKIL SPT99T-01, BOSCH GTS18V 8-1/4 Inch Table Saw.
- Perfect replacement for DEWALT DWA181440 and Freud DIABLO D0840, D0840X 8-1/4 inch saw blade
- Finishing 8-1/4" Saw Blade for hardwood, softwood or plywood.
- The ideal combination of cutting speed and long life. A great choice for the jobsite finish cuts in decking, fencing, fascia, OSB and stacked plywood.
- FOXBC table saw blade 8-1/4 Inch 40-Tooth suggested projects: Remodeling/Demolition, Siding/Decking and keep your table saw cutting cleanly for the best results
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
CA PROP 65 WARNING
Works great
I was very happy to get this 8-1/4" blade. I find the size and choice getting hard to come by. It fits great on my Northern Tool Co mini table saw. It's not a very powerful saw but thanks to the thin kerf and sharp teeth I had no trouble with any of the cuts I made. Cuts were smooth, with significantly less noise than my old blade. This blade is not cheap but it's a positive example of getting the quality you pay for. I recommend it.
This blade does the job I need it to do. Not a superfine, finishing type cut for me but definitely serviceable.
It still pretty sharp at this point and the price is great compared to what you can pay for a 40 teeth blade.
Time will tell for sharpness and longevity, but solid so far.
I have a Skil worm drive table saw and I only had the stock blade for it and needed to cut some 1/8 Baltic Birch and acrylic. I thought this blade might be a good choice. For me it was.
Skill has a warning about using a blade with too thin a kerf, I think it's related to the riving knife and a safety concern. This blade didn't seem to cause any issues. I used painters tape along the cut and got good results
This is a great table saw blade. The 40 teeth gives you nice and clean cut. This blade will fit any 8 1/4 table saw. The blade comes very sharp and seems very durable. Over all I think this is a great finishing blade for the price.
You may also like
Recently viewed
Let customers speak for us
I don't often review but I have gone through many planer blade sets for this planer. I'm very glad there is an exact fit replacement as it seems Dewalt has stopped selling blade replacements. These seem to be an exact fit. All dimensions are exact except they are consistently .02 grams heavier and there's no pyramid stamp. I only did the weight because I could not find discrepancies (LxWxHxT). I read a review that they are not as good as the original, don't last as long. May be slightly softer material, IDK...TBD. I will get back to you on this.For now I am giving it 5 stars. I'm on my 9th double pack of blades from Dewalt. That's 4 blade sets per double pack. 36 blade changes. Excellent planer. Glad FoxBC picked up this replacement part.Price = matchesFit = matchesLife & cut = TBDHope this helps, Cheers!
Will get dull a little faster then their heated counterparts. However for the first time in 5 sets of blade I’ve just rotated these and did not see a single chip in the blades. This usually happens with any other blades I’ve tried including original DW735 13” blades.
Im going to use these from now on only, needs to be rotated just a little more often, but at the price point they are great. If you start questioning their performance then rotate/replace and go again with a fresh cut. 5 stars!
Customer image
there are more expensive, higher quality blades available, but this is still a great crosscutting blade and very much worth the money.
I got this for planning old rough Purple Heart after I destroyed the factory knifes ..I’ve excluded before and after photos with no sanding straight out of the planner
Works great
I make a lot of end grain cutting boards. Those things are really tough to level out after final glue up. I had been using a drum sander, but the heat generated and other factors just made it nearly impossible to get the boards flat. Now, I can use the planer. I make VERY light passes, but this thing cuts end grain!! And it puts a reasonable surface on the board so I am not having to sand out the horrible grooves from the drum sander. I start at 120 grit now. Saves me HOURS of work. Could not be more stoked on this cutter head.
I was using it to trim off excess of melamine veneer edging. Very happy with results
I have an old Craftsman 4 inch jointer (model 149.236223). The difference in the knives was night and day. It only took a few minutes to change the blades out and I was back in business. I tested it on a few pieces of pallet wood and was very impressed with the results. I would definitely recommend these blades for anyone who needs new 4 inch jointer knives.
This is a well made ripping blade. Sharp with good brazing on the carbide. Venting expansion slots are actual laser cut. The big box version has taken to painting them on... Fit right on my arbor and runs true. I do miss the lubricant coating, but washing it after each day of use will still work. This brand has been around for a few years now. Recommended.
These planer blades arrived on time in a bubble wrap packed box with the blades securely retained in a plastic container with the blades wrapped in oil paper. These blades are very sharp. They had no nicks or chips and installed easily in my DeWalt planer. Put in use that day with excellent results, I highly recommend these blades and this supplier.
I was very happy with this dado set. The larger number of teeth on the outer blades make a nice clean cut. It has a nice range of dado cut widths by varying the inner cutter and spacer combinations. Blades appear to be of high quality and the price was reasonable. Packaged well for shipping and or storage too.
This blade does the job I need it to do. Not a superfine, finishing type cut for me but definitely serviceable.
It still pretty sharp at this point and the price is great compared to what you can pay for a 40 teeth blade.
Time will tell for sharpness and longevity, but solid so far.
Utilizo para colocar mas rapido las cuchillas de la sepilladora pero ace falta practica.
This is a great table saw blade. The 40 teeth gives you nice and clean cut. This blade will fit any 8 1/4 table saw. The blade comes very sharp and seems very durable. Over all I think this is a great finishing blade for the price.
I have a Milwaukee cutter. This replacement blade did not quite fit. I had to use a small cordless cut off tool to grind a small fraction of an inch to open up the jaws. I use the side edge of the blade to grind off the smallest amount. The amount is so small I don’t think an angle grinder would work and it’s also so hard. I don’t think a file would work very easily either. I used a Milwaukee cordless cut off tool.Also take a picture of the tool before you take it apart. Once you take that last bolt out, the whole thing falls apart.
